Industrial Piercing: Pain, After Care & the Healing Process

Industrial Piercing: Pain, Aftercare, and the Healing Process. Industrial ear and bar piercings, black girl, jewelry, Berkeley, anatomy, cost, near me, jewellery

Erik Dakota created the Daith and Rook piercings, as well as industrial piercings, which originally became popular in the early 1990s.

Read More

In 1992, Body Play magazine made the first mention of the “industrial ear project,” which is another name for industrial piercing.

People from all walks of life have become interested in industrial piercings since they were first made available.

This is because the wide range of industrial jewelry makes it possible for the user to make the piercings fit their style.

Even celebrities like Miley Cyrus, Ashley Tisdale, and Kylie Jenner have this kind of piercing.

Industrial piercing meaning

An industrial piercing (North America), scaffold piercing (UK/Ireland), or construction piercing is any ear piercing with two pierced holes connected by a single piece of jewelry.

These piercings usually include a two-fold puncture of the cartilage in the upper ear.

It is necessary to have two piercings: a forward-helix piercing, which is made quite close to the skull, and a second piercing, which is made farther down the helix on the other side of the ear.

Industrial piercing has historically been connected to punk fashion, but as body piercings—cartilage piercings in particular—gain general acceptance, they are starting to look less edgy and more like a charming and distinctive accent to any cartilage party.

Your industrial piercing will require two piercings at once; thus, the aftercare procedures may be a little more challenging.

Furthermore, you must ensure that you pay attention to the healing process because cartilage needs more care than more fleshy places.

It’s not for everyone because the industrial piercing’s attractiveness also heavily depends on the structure of your ears.

Other types of ear piercings include:

• Helix piercing
• Tragus piercing
• Auricle
• Cartilage piercing
• Rook
• Daith piercing
• Lobe
• Conch piercing
• Snug
• Antitragus
• Tragus piercing
• Earlobe
• Orbital piercing
• Antihelix
• Helix piercing

What are the different variations of industrial piercings?

In nearly every industrial piercing, the typical forward-helix-to-outer-helix barbell is used.

Going from the top of the helix down through the rook is one way to perform an industrial.

Another route could be via the lower conch and the back of the ear, passing through the rear of the upper conch.

The possibilities differ widely from client to client, but all industrial piercings require appropriate anatomy for the piercing.

What is the process of giving someone an industrial piercing?

Getting an industrial piercing is very much the same as getting any other ear piercing.

A hollow needle is used to make the incision, and the most notable distinction is that it passes through several spots before the jewelry is inserted.

Due to the piercer’s anatomy and personal preference, each industrial piercing is executed slightly differently.

This is because different techniques are required.

Industrial piercing price

Like any modification, the price of an industrial piercing will vary based on the business and where you live.

Additionally, piercings will be charged for two separate things: the cost of the jewelry and the actual piercing, both of which have varying prices.

There are two expenses to take into account in a high-quality piercing studio.

There is a piercing service price up front, and then there are jewelry costs.

The customer can depart with anything from a basic titanium barbell to a solid gold barbell adorned with real diamonds when the two costs are separated.

However, there are dozens of jewelry possibilities, so the final cost will depend on the choice made.

Industrial piercing pain

Although everyone’s pain threshold is different, those who have had cartilage piercings before will know that getting both ears pierced at once is a difficult experience and that cartilage piercings, in general, are more painful than getting your earlobes pierced.

Nonetheless, industrial piercings, when done correctly by a professional, usually take little time and cause little discomfort—think of it as a sharp, painful pinch that passes quickly.

Industrial piercing healing

How much time does it take for a commercial piercing to heal? The bad news is that it might take up to a year for an industrial piercing to heal completely.

Fortunately, it will heal enough to replace your jewelry after around three months.

Industrial piercing healing time

About two to three months

The healing process for an industrial piercing will be the same as that of any other cartilage piercing.

The healing process typically takes two to three months, but it may take longer.

Make sure you’re completely healed by speaking with your piercer before ceasing aftercare procedures.

Industrial Piercing Jewelry

An industrial barbell is the most popular type, and it can be very basic…or a little more, if you choose.

Our extensive collection of industrial barbells features a wide range of embellishments, such as intricate metalwork, elegant diamonds, and whimsical charms.

Another option is to wear separate jewelry, extending your options to include labret studs, bent barbells, seamless rings, or captive bead rings.

You can also choose for curved, looped, and zig-zag barbells.

What kinds of jewelry materials are used in industrial piercings?

Gold: Ensure that any gold jewelry you choose is a minimum of 14 karats in weight, irrespective of whether it is yellow, rose, or white. 18-karat gold is excessively soft and will develop indentations that have the potential to harbor pathogens.

Stainless steel of implant grade: Steel is the most popular metal for body piercings due to its abundance of color options and generally trouble-free nature.

Surgical steel, however, will cause skin irritation if you have a nickel allergy.

Titanium is the least likely metal to irritate out of any of them, which is why it is frequently chosen for piercings.

Titanium does not contain nickel. In addition, it has multiple hues, is lightweight, and is resistant to tarnish and corrosion.

How to change out an industrial piercing

It’s essential to wait until your industrial piercing is completely healed—anywhere from five to nine months—and maybe a little longer just to be safe.

You run the risk of having to get the piercing redone if you attempt to remove it before then.

Although it’s possible to remove an industrial piercing yourself at home, experts believe that having it removed by a professional is the best course of action.

Typically, you can remove the barbell by unscrewing one or both ends.

Everybody’s ears vary greatly in size, so sizing is highly specific for them.

I advise having any new jewelry size by a piercer to make sure you have the best fit possible.

What is the proper way to clean an industrial piercing?

As with any other cartilage piercing, you should clean your industrial piercing twice a day.

Soak the wound in a mild saline solution, such as H2Ocean Piercing Aftercare Spray, for at least three to six months.

The spot will only need to be washed once a day after six months.

Aftercare routine

You must take care of your industrial piercing, particularly during the healing process, if you want to maintain its aesthetic and comfort.

• Taking care of your piercing is simple if you remember to do the following:
• Avoid handling or playing with your new piercings excessively, especially if you haven’t adequately cleaned your hands.
• When cleaning your piercing, especially while it’s healing, use natural, skin-sensitive items.
• Applying a lukewarm saline solution with a cotton ball or Q-tip works quite well.
• Take a fresh paper towel and use it to dry your piercing.
• While your piercing is healing, keep your original jewelry in place.
• Sleeping on your piercing should be avoided as much as possible as it might put additional strain on the metal.

Side effects of industrial piercings

The side effects of an industrial piercing include:

Irritation bumps: Whether it’s from touching it or an allergy to the jewelry, little pimples around the piercing sites are typical when your new piercing is irritated in any manner.

If you believe that your piercing is the cause of your discomfort, change the barbell that is in there, stop fiddling with it, and pay more attention to your aftercare.

Rejection: is referred to as the process by which your body pushes out the new piercing because it feels threatened.

Your body swiftly repairs the skin beneath the piercing as it is driven out, preventing it from being pushed back in.

To avoid making the process go longer, the only method to deal with rejection is to get it removed by a professional.

Infection: Contrary to popular belief, piercing infections are more often than you may imagine.

However, they are easily avoidable by carefully following aftercare instructions.

Prolonged redness, swelling, yellow or green discharge, soreness, burning, itching, and excruciating pain are typical infection signs.

As the piercing sites heal, it’s usual to see some redness, feel some soreness, or notice some crusting; but, anything more than a minor inconvenience could be an indication of a more serious issue.

Industrial piercings are a common source of keloid scars. These scars usually grow much larger than the original piercing location and are a result of the skin’s reaction to the stress.

In addition to being bothersome, keloids can be extremely painful.

They need significant care in the form of cortisone injections or laser or surgical scar removal.

Conclusion

An alluring and fashionable way to express oneself is through industrial piercings.

You may approach this unusual piercing experience with confidence if you have the appropriate information and direction.

Always select a respectable piercing studio to ensure expert guidance and a secure process.

You may speed up the healing process and continue to enjoy your gorgeous industrial piercing for years to come by adhering to the recommended aftercare instructions.

Take advantage of this amazing body alteration to follow the trend and look fierce!

FAQs

What does it mean when a girl has an industrial piercing?

Industrial-piercing black girl

An industrial piercing connects the helix and anti-helix sections of the ear. It is shaped like a scaffold.

It is possible to have several piercings in one ear, but because of the nature of the healing process, it is not advised for first-time industrial piercers to obtain multiple at once.

Where can I get an industrial piercing near me?

The best way to get this piercing near you is to check Google Maps to get the closest studio to you.

How painful is a septum piercing?

Piercings of the septum may cause pain, particularly if the septum deviates. It has a powerful pinch, prick, or sting to it.

A piercing that passes through the nasal septum is known as a septum piercing.

The wall dividing the nose into two nostrils or nasal chambers, is called the nasal septum.

How painful is an industrial piercing?

Having said that, because an industrial piercing is performed using a bigger gauge and through several sites at once, it is typically more painful than regular cartilage piercings.

What ears can’t get industrial piercings?

You should have little trouble getting an industrial if your ear features a noticeable ridge that extends from the upper section of the ear to roughly halfway.

However, an industrial ear will probably not work out for you if your ear type is one where the upper section of the ear is primarily or completely flat.

Do industrial piercings heal badly?

Recuperation periods for industrial piercings can differ.

The healing time for most industrial piercings is two to three months.

The first several weeks may see some edema, but after that, things should get better.

It’s crucial to remember that keloiding is typically more common with scaffold piercings.

What does industrial piercing stand for?

An industrial piercing (North America), scaffold piercing (UK/Ireland), or construction piercing is any ear piercing with two pierced holes connected by a single piece of jewelry.

What are the 3 most painful piercings?

This is a list of potential pain levels for each form of piercing, from most to least painful:

• One of the body parts with the highest density of nerves is your genitalia.
• The pain threshold for a breast piercing. Another sensitive place that is frequently pierced is the n*pple.
• Pain level from a nose piercing
• Pain from a dermal piercing

What is the hardest piercing to heal?

Because of the nerves that go through them, nose piercings are infamously difficult to heal.

Before they may be altered, they must wait at least 12 weeks, and even then, further time might be required.

What to avoid with industrial piercing?

How to proceed

• Unless you are cleaning your piercing, avoid touching it.
• Wear your initial jewelry in place as your piercer advised for the shortest amount of healing time.
• For at least the first month after healing, stay away from bodies of water.
• Never go to sleep with a piercing!
• Maintain your health as the healing process occurs.

Who should not get an industrial piercing?

The ideal choice for you may not be industrial piercing jewelry if the top portion of your ear does not have a noticeable ridge.

Having smaller ears can also make industrial piercings problematic.

Can you wear earbuds with an industrial piercing?

Now that your piercings are healed, it’s time to resume enjoying life as before!

You can continue wearing earphones and headphones without risk!

Finding methods and jewelry designs that go well with them may require some trial and error, but it is doable!

Make sure that items like tragus and conch piercings are appropriately sized.

Do industrial piercings bleed a lot?

Light bleeding throughout the first week is typical. Please get in contact with your piercer if this continues.

What are the benefits of an industrial piercing?

The fact that an industrial piercing essentially consists of three piercings in one is possibly its best feature.

For an industrial aesthetic, you can link a straight barbell through both piercings; alternatively, you can fill each piercing with a cartilage stud to achieve the typical cartilage piercing aesthetic.

Can I take my industrial piercing out to sleep?

Sleeping on an industrial piercing should be avoided as it puts extra strain on the jewelry.

If you sleep on it, the likelihood of scarring increases.

What do I need to know before getting an industrial piercing?

Make sure the studio has prior experience performing industrial piercings and visit the facility in person.

Make sure you’ve had a substantial meal, are properly hydrated, and haven’t taken any drugs or alcohol before receiving an industrial.

In addition to keeping your ID close to hand, you want to be in good health.

IMAGE CREDIT